MAXYOND 100A 5–14S AM32 Brushless ESC for UAVs

MAXYOND 5-14S 100A AM32 ESC 128KHz PWM for UAV Drones, FPV, RC Airplane & Agricultural UAV

Description

The 5-14S 100A ESC is a high-performance brushless electronic speed controller (ESC) that supports 5-14S LiPo battery input and provides a continuous current rating of 100A. It is widely used in FPV racing drones, multi-rotor UAVs, fixed-wing model aircraft, RC cars, RC boats, agricultural spraying drones, and other high-performance RC applications.

Specifications

Type: Brushless Motor Electronic Speed Controller (ESC)

Continuous Current: 100A

Burst Current: 130A

Weight: Net Weight 72g ± 5g

Dimensions: 68.5mm (Length) × 34mm (Width) × 24.5mm (Height)

Input Power: 5S–14S LiPo Battery

Firmware Version: MAXKGO_V1_F421

Firmware Upgrade: Supports online firmware updates via AM32.ca

Communication Protocols: Dshot300, Dshot600, Servo PWM

Telemetry Feedback: The TX telemetry port supports ESC data feedback, including voltage, current, temperature, motor RPM, and other operating parameters

BEC: No BEC output

Cooling Fan: No built-in cooling fan

Water Resistance: Not waterproof; only resistant to light splashes

Features

Mini Size, Powerful Performance

Compact design with high power output, providing excellent performance for various RC applications.

Multiple Protection Functions:

Low Voltage Protection

Over Temperature Protection

Motor Stall Protection

Low-Speed Protection

Equipped with a high-performance ARM 32-bit Cortex-core MCU with a processing frequency of up to 120MHz.

Stall Protection for RC Cars and Crawlers

Helps prevent ESC damage caused by motor blockage during low-speed or high-load operation.

Stuck Rotor Protection for Multi-Rotor Drones

Provides protection against propeller blockage or sudden motor stoppage during flight.

Flexible Firmware Upgrade Support

Firmware can be upgraded through:

Betaflight Passthrough

Single-wire Serial

Arduino

AM32 Web Configurator Support

Supports online parameter configuration through AM32.ca.

Multiple Protocol Compatibility

Supports:

Servo PWM

Dshot300

Dshot600

EDT (Extended Dshot Telemetry) Support

Enables full Dshot telemetry feedback through the signal wire for real-time ESC monitoring.

Sinusoidal Startup Mode

Provides smoother startup performance for RC cars and crawlers, reducing vibration and improving control response.

Applications

Multi-rotor drones

Fixed-wing model aircraft

RC cars

RC boats

Package Contents

Package 1

5-14S 100A ESC × 1

Heat Shrink Tubes × 5

2-Pin Dupont Cable × 1 (33cm)

Package 2（with 10AWG)

5-14S 100A ESC × 1

Heat Shrink Tubes × 5

2-Pin Dupont Cable × 1 (33cm)

3-Pin Dupont Cable × 1 (33cm)

XT90 Male Connector × 1

Positive & Negative Power Wires × 1 (10AWG / 200mm)